C2C has used ABB electromagnetic flowmeters to meet strict government sustainability targets 11 years ahead of schedule and is part of a group that won a national utility industry award for supply chain excellence.
A consortium of Severn Trent Services and Costain, C2C is a member of the Aquatrine Supplier Association that transferred responsibility for Ministry of Defence’s (MoD) water services to three different contractors. C2C is responsible for providing water services sites in the North, East and South East of England.
By applying the latest techniques and technologies in leakage detection, like ABB’s AquaMaster, and repair across the Defence estate the Aquatrine team has been able to deliver savings of 25 million litres of water every day.
Electromagnetic flowmeters played a key role in cutting water leakage across a large swathe of the Ministry of Defence estate with reductions of 60% achieved at some sites. Leakage dropped by approximately 2 million m3/year across more than 1,500 MoD sites where water and waste utility assets are managed by C2C Services.
C2C’s water resources manager, Mark Amor, says that the AquaMaster meters from ABB have been central to the success of C2C’s leak reduction programme. “We’ve used a targeted approach and it’s all based on the availability of high quality data.”
Around 1100 AquaMasters have already been installed, with more meters planned where additional flow data is required. With a measuring range of 1000:1, AquaMasters are accurate across a very wide range of flows, making them ideal for this project. ‘Gross Meters’ are used to measure the consumption on each site by monitoring the gross incoming water supply. These are also used to continuously validate Statutory Undertaker (SU) revenue meters which are used by local Water Companies to generate bills. ‘Night line meters’ provide a critical indication of leakage levels during periods when legitimate consumption is at its lowest.
A key feature of the AquaMasters supplied is the convergence of flow measurement, data logging and GSM-SMS technology into one unit. Using this technology, C2C can remotely set the integral data logger to either high resolution 1 minute logging for in-depth investigation of night lines, or a standard 15 minute frequency for normal operation. Once a day, all the readings are uploaded to a central server using text messages sent via the AquaMaster’s built-in GSM facilities.
Once on the server, the data is managed using AutoChart software from Information and Performance Services (I+P). AutoChart’s Windows-based interface lists all the meters and their readings graphically or numerically. It also shows the status of each meter using a traffic light alarm system. The C2C project is a major deployment of ABB’s AquaMaster meters in conjunction with AutoChart.
Once on the secure server, the data can be read and manipulated over the internet from anywhere in the world. “This approach means that C2C doesn’t need to have sophisticated software loaded onto all of its PCs,” says I+P Managing Director, Ashley Roe. “It’s all on the server.”
The combination of the AquaMasters and AutoChart means that the system registers actual meter readings, which gives it an advantage over other systems according to Roe. “Many other systems use inferred readings from pulses sent by the meters to separate loggers, but ours reads the meter itself. This makes it more accurate by eliminating the errors normally associated with signal conversion to pulsed outputs necessary for transfer to loggers.”
For at opfylde sine kontraktmæssige og forretningsbehov overvåger C2C vandforsyningen i hele regionen til en høj standard for nøjagtighed. Oplysningerne bruges til reduktion af lækage og fakturering. "Elektromagnetiske målere er virkelig den eneste måde at opnå den nøjagtighed på," siger Amor.
C2C also needs to be able to verify that the meters continue to provide accurate readings throughout their lives. “We’re required to demonstrate that we’re within compliance and provide an audit trail, so verification is very important,” says Amor. All the AquaMaster meters have been electronically fingerprinted, so any deviation from the original factory electromagnetic performance and calibration can be detected using ABB’s CalMaster2 verification system.
For each managed site, C2C has identified a point at which further leakage reduction will be uneconomical and the aim is to reach that level in each case. “Once we have reached the economic point of leakage repair, continued monitoring will enable us to spot any new leaks as they occur.” says Robin Phillips, Deputy General Manager for C2C. “As for all organisations with private distribution systems, our economic point of repair is significantly lower than a typical water utility’s because our cost of leakage is based on the price paid for water as opposed to the much lower cost of water production. With the ABB technology, our Technicians can reduce costs by identifying and repairing leaks very quickly.”
"Enhver reduktion i lækage som set i denne applikation sparer ikke kun vand til C2C og MoD, men sparer også energi, der bruges til at pumpe og producere vand," siger Tony Hoyle, ABBs UK & Ireland General Manager - Sales Measurement Products ". Dette har også en positiv miljøpåvirkning, der gør det muligt for C2Cs kunder at reducere deres CO2-udslip betydeligt og minimere brugen af omkostningerne. "
For more information about this application of about ABB’s AquaMaster flow meter technology, email [Email protected] ref. ‘C2C’ or call 0870 600 6122.